SMARC-sAMX6i
Ultra-low power ARM and SoC-based SMARC Module based on NXP i.MX6 family Solo - Dual - Quad Core.
Mouseover Zoom loading...
Specifications
- Based on NXP i.MX 6 Family
- SoC scalable from Solo Core, Dual Core up to Quad Core
- ARM specific featureset incl. graphic
NXP based SMARC Computer-on-Modules enables highly scalable ultra-low power applications
The highly scalable Kontron SMARC-sAMX6i modules with single, dual or quad core NXP i MX6 processors cover an extremely wide performance range. Based on the ARM Cortex A9 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance.
Features
| Compliance | SMARC - Smart Mobile Architecture by SGET - small size |
| Dimensions (H x W x D) | 82mm x 50mm |
| CPU | Freescale i.MX 6 Single, Dual and Quad Core ARM Cortex-A9 |
| Main Memory | up to 2GB DDR3 memory down |
| Graphics Controller | Dual Display HD 1080p Decode/Encode 2D/3D acceleration |
| Ethernet Controller | integrated |
| Ethernet | 10/100/1000 MBit Ethernet |
| SATA | 1x SATA (dual/quad core) - (solo) |
| Flash Onboard | 2-64GB eMMC |
| Panel signal | Parallel LCD 18/24 bit LVDS Single Channel 18/24bit HDMI |
| USB | 3x USB 2.0 (one OTG) |
| Serial | 2x RX/TX (Ser1/3) 2x UART (Ser0/2) |
| Interface | 12x GPIO, SDIO, 5x I²C, 2x I²S, 2x SPI, SPDIF, WDT, 2x CAN Camera Interface (PCAM, CSI) |
| Operating System | Linux, Android, WEC7 |
| Power Supply | 3V - 5.25V Operates directly from single level Lithium Ion cells or fixed 3.3V or 5V power supplies |
| Power Consumption | Typ. 5W |
| Power Management | Battery and System Management |
| Temperature | Operation: -40° to 85°C, Storage: -40° to 85°C |
| Humidity | 93% relative Humidity at 40°C, non-condensing (according to IEC 60068-2-78) |
Downloads
Datasheets
SMARC-sAMX6i
[ datasheet_smarc-samx6i_2019-01-17.pdf, 2.46 MB, Mar.19.2021 ]
Manuals
User's Guide
[ smx6m120.pdf, 861.74 KB, Dec.13.2017 ]
General Safety Instruction
[ general-safety-instructions.pdf, 628.88 KB, Aug.02.2024 ]
White Papers
SMARC™ module 2.1
[restrictions apply]
This paper discusses how SMARC™ module is continuing to evolve to ensure system designers, SIs and OEMs can meet the ongoing challenges of cost-effectively deve-loping next generation small form factor IoT- andAI-enabled embedded systems.
Modules and Motherboards WP [restrictions apply]
Robotic-Assisted Surgery White Paper [restrictions apply]
SMARC specification folder
(Release Candidate)
[ kontron_smarc_folder_feb2013.pdf, 1.92 MB, Nov.27.2013 ]
Use Cases
The tough choice of Processors
Solving challenges in selecting computer boards & modules for IIoT projects. In this article we support you to make the right choice for your application: To find the best balance of processing power, graphics capabilities and connectivity on the one hand and size, power consumption, and cost on the other.
[ artikel_processor-choice_eu-1-.pdf, 4.42 MB, Apr.20.2023 ]
A SMARC Approach to Medical Device Life Extension
A medical manufacturer maximizes investment in essential system with retrofit Kontron Computer on Module solution upgrade.
[ uc_medical-smarc_final.pdf, 8.69 MB, Apr.20.2023 ]
Tech Spec Sheet
Tech Specs SMARC
[ tech-spec_smarc.pdf, 5.3 MB, Apr.04.2024 ]
Services
Kontron Services Brochure
[ kontron-services-brochure.pdf, 8.9 MB, Dec.17.2020 ]
More Downloads
All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section
Accessories
|
SMARC Evaluation Carrier 2.1
51301-0000-00-0 |
|
SMARC Evaluation Carrier 2.1 | more |
|
SMARC Mounting Kit 51117-0000-00-0 |
SMARC Mounting Kit | ||
|
HSP SMARC™-sAMX6 51003-0000-99-1 |
Heatspreader for SMARC™-sAMX6 |
back
Info Request
Comparisons (up to 5 products)
There are currently no products in your Comparison.
Services
Take advantage of our full-service approach
To find out more about our services go to services pages
Customer Section
This section is exclusively for Kontron Customers. After registering you will gain access to
BIOS images, product change notifications (PCNs), 3D models for CAD, and software development
tools.
Click below to login or register.
*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.
Click below to login or register.
Login or
register here
register here
*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.
