SMARC-sAL28
SMARC module with NXP LS1028A in short size
Mouseover Zoom loading...
Specifications
- Dual-Core Cortex A-72 on a SMARC short size form factor
- Up to 8 GByte DDR3L non-ECC and ECC memory down. ECC as default.
- One PCIe line can be used as QSGMII port to drive 4 1 GByte TSN capable Ethernet ports
- 3D GPU
- 2x Gigabit Ethernet, TSN capable
Kontron offers for the first time, a SMARC module with up to five integrated TSN-capable 1GB Ethernet ports directly from the controller. It meets IEEE 802.1 TSN (Time Sensitive Networking) specifications, and is therefore ideally suited for use in industrial IoT or industrial 4.0 systems based on Ethernet protocol standards. The module features a NXP Dual Cortex A72 LS1028A processor and a SMARC small form factor 3D GPU and is perfect for use at industrial temperatures according to category E2 between -40°C and +85°C.
Features
| Compliance | SMARC 2.1 |
| Dimensions (H x W x D) | 82 x 50 mm |
| CPU | NXP Dual Cortex A72 LS1028A processor |
| Main Memory | up to 8 GByte DDR3L (ECC) |
| Ethernet | up to 2x 10/100/1000 MBit Ethernet |
| Flash Onboard | 2-64 GByte eMMC 5.1 |
| PCI Express / PCI support | Up to 2x PCIe x1 or 2x PCIe x2 or 1x PCIe x4 |
| Panel signal | 1x DP, alternativly eDP or LVDS as BOM option |
| Display | DP/eDP/LVDS (BOM option) |
| USB | up to 6x USB 2.0, 1x USB 3.0 |
| Serial | 3x serial interfaces (2x RX / TX only |
| Special Features | Alternate function on PCIe C/D: SXGMII or UXGMII to connect Ethernet bridge phy directly on the carrier (allows up to 5x TSN capable 1GB LAN ports) Security Chip (Support of Kontron Approtect) on request |
| Operating System | Yocto Linux |
| Power Supply | 3 V – 5.25 V operates directly from single level Lithium Ion cells or fi xed 3.3 V – 5 V power supplies |
| Temperature | Operating: -40 °C to + 85 °C Non-Operating: -40 °C to +85 °C |
| Humidity | 93 % relative Humidity at 40 °C, non-condensing (according to IEC 60068-2-78) |
Downloads
Datasheets
SMARC-sAL28 Datasheet
[ smarc-sal28_datasheet.pdf, 3.06 MB, Nov.20.2018 ]
Manuals
SMARC-sAL28
Rev. 1.1, 31. March 2021
[ smarc-sal28_user-guide_rev-1-1_2021-03-31_w2016.pdf, 6.41 MB, Aug.08.2024 ]
General Safety Instruction
[ general-safety-instructions.pdf, 628.88 KB, Aug.02.2024 ]
White Papers
SMARC™ module 2.1
[restrictions apply]
This paper discusses how SMARC™ module is continuing to evolve to ensure system designers, SIs and OEMs can meet the ongoing challenges of cost-effectively deve-loping next generation small form factor IoT- andAI-enabled embedded systems.
Modules and Motherboards WP [restrictions apply]
Robotic-Assisted Surgery White Paper [restrictions apply]
Use Cases
The tough choice of Processors
Solving challenges in selecting computer boards & modules for IIoT projects. In this article we support you to make the right choice for your application: To find the best balance of processing power, graphics capabilities and connectivity on the one hand and size, power consumption, and cost on the other.
[ artikel_processor-choice_eu-1-.pdf, 4.42 MB, Apr.20.2023 ]
A SMARC Approach to Medical Device Life Extension
A medical manufacturer maximizes investment in essential system with retrofit Kontron Computer on Module solution upgrade.
[ uc_medical-smarc_final.pdf, 8.69 MB, Apr.20.2023 ]
Tech Spec Sheet
Tech Specs SMARC
[ tech-spec_smarc.pdf, 5.3 MB, Apr.04.2024 ]
Services
Kontron Services Brochure
[ kontron-services-brochure.pdf, 8.9 MB, Dec.17.2020 ]
More Downloads
All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section
Accessories
|
SMARC Evaluation Carrier 2.1
51301-0000-00-0 |
|
SMARC Evaluation Carrier 2.1 | more |
|
HSP SMARC-sAL28 51011-0000-99-1 |
Heatspreader for SMARC™-sAL28 | ||
|
SMARC Mounting Kit 51117-0000-00-0 |
SMARC Mounting Kit |
back
Info Request
Comparisons (up to 5 products)
There are currently no products in your Comparison.
Services
Take advantage of our full-service approach
To find out more about our services go to services pages
Customer Section
This section is exclusively for Kontron Customers. After registering you will gain access to
BIOS images, product change notifications (PCNs), 3D models for CAD, and software development
tools.
Click below to login or register.
*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.
Click below to login or register.
Login or
register here
register here
*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.
