COM Baseboard Design Training | Kontron Europe and Asia

IoT

One of the new challenges arising with the use of edge, fog, and cloud architectures is the connection of components to each other and to the public cloud. An important element of developing a solution capturing all pieces is the IoT framework susietec

At the field, or edge level, data is collected by industrial computers, e.g. by gateways, which process, filter, analyze and act on these data in real-time right at the device.

Edge, fog and cloud applications demand increasing computing power. The interfaces to sensors or machines often require non-standard solutions. Especially in smaller machines, space is limited or restricted in some dimension and need a special solution.

Today, the connection from the sensor device to the embedded cloud takes place via real-time data communication, on sensor and edge level - for example Industrial Ethernet or fieldbuses - and gateways , which provide the transformation of real time data into the informational area.

Downloads

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Learn more about how Kontron supports its customers by improving their products and solutions. Read our Use Cases. Contact us for further information.

Learn more about our solutions for various industries by downloading our Whitepapers.

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Get extended insights into our products and solutions by participating in our webcasts. You can find all webcasts here. Contact us for further information.

Learn more about our solutions for various industries by downloading our Whitepapers.

Kontron Academy Workshop now offers COM Baseboard Design Training.

This training is recommended for development engineers, product managers and others involved in the design, verification and validation of COM baseboards. This training is highly recommended as the knowledge gained will assist with avoiding expensive corrective actions during the run of your project. Kontron experts with field experience will provide instruction to ensure you will understand how to avoid common mistakes.

Training Agenda:

Introduction COM concept with product highlights
Documentation, specification, support
COM Express® COM.0 Rev. 2: Types 6 and 10
ETX® / COM Express® migration paths
COM Express® Rev. 2: Type 6 and Type 10 Pin-outs
General layout rules
Design guide lines
PCI / PCI Express design
LCD solution: “JILI” cable concept
Module mounting
Thermal design & management
Q&A session

For more information or to get a quote, pleaseCONTACT US

Support & Services